|
Maintenance instruction
In order to longer and optimal work of
Kremlin's, Vostok, Attaché, Breeze automatic 2416B watches
would you please read and present instruction attentively |
|
• WINDING UP
While wearing watch on your hand every day there's no need to wind it up.
Watch running is provided by a special mechanism of automatic self-winding up, which makes your watch run thanks to movement of your hand. But if you do not wear your watch more than 24 hours it's necessary to wind it up. Winding up is to be done by turning the winding crown, situated in position 1(app. 25-30 revolutions).
• SETTING UP OF TIME
Set the winding crown into position 2, pulling it till a click. Turning the winding crown counter clockwise set the correct time. Once you set the correct time put the winding crown
into position 1 pushing it to the case. |
 |
|
• SETTING THE CALENDAR
Set the winding crown into position 2. Set the correct date
by turning watch hands clockwise. Once you set the date,
put the winding crown into position 1. |
|
• RAPID SETTING OF THE CALENDAR
Set the winding crown into position 2. Move the hour hand
from 12 to 8 counter clockwise and then back from 8 to 12
clockwise while the correct date appears. After that, put the
winding crown into position 1. |
Maintenance instruction
In order to longer and optimal work of
Komandirskie, Red October, Diver-Amphibian, Prestige, KGB automatic 2416B watches
would you please read and present instruction attentively |
|
• WINDING UP
While wearing watch on your hand every day there's no need to wind it up (position 1 the crown is screwed on the case). Watch running is provided by a special mechanism of automatic self-winding up, which makes
your watch run thanks to movement of your hand. But if you do not wear your watch more than 24 hours it's necessary to wind it up. Winding up is to be done by turning the winding crown, situated in position 2 (app. 25-30 revolutions). Slightly pull the crown away from the case during winding. |
|
• SETTING UP OF TIME
Set the winding crown into position 2 and then pull it till a click. (position 3). Turning the winding crown counter clockwise set the correct time. Once you set the correct time put the winding crown into position 1 pushing it to the case.
• SETTING THE CALENDAR
Set the winding crown into position 3. Set the correct date by turning watch hands clockwise. Once you set the date, put the winding crown into position 1.
RAPID SETTING OF THE CALENDAR
Set the winding crown into position 3. Move the hour hand from 12 to 8 counter clockwise and then back from 8 to 12 clockwise while the correct date appears. After that, put the winding crown into position 1.
|
 |
|
Maintenance instruction
In order to longer and optimal work of
RussArmy, Attaché quartz-analog chronograph watches
would you please read and present instruction attentively would you please read and present instruction attentively |
|
1. Basic Specifications:
• Functions:
Hours; Minute; Small Second; Date; and 1/20th Second chronograph
(measure up to 11 hr. 59 min. 95)
• Battery : SR927W or equivalent
• Accuracy: ± 20 second/month
2. Normal Time & Calendar Setting:
• Time:
Pull Crown outermost to the 2nd click position, turn crown clockwise or counter-clockwise to set the Hour and Minute
hands backward or forward respectively.
|
 |
• Calendar:
Pull Crown midway to the 1st click position, then turn crown counter-clockwase to advance the date.
Pull Crown midway to the 1st click position, then turn crown counter-clockwase to advance the date.
3. Chronograph Operation
• Start/Stop:
Each depression of PB1 will activate the chronograph to Start/Stop counting. Although 1/20 second hand stops when the measurement time is over 30 seconds, the watch continues measuring the elapsed time, and exact time elapsed is indicated when the measurement is stopped by depressing PB1
• Reset:
Push PB2 to reset the chronograph to Zero position. If PB2 is depressed again after the chronograph is reset, 1/20 second hand changes to the form of small second hand & moving by each second.
• Zero Reset:
Pull crown to 2nd click position. Push PB1 to set Chrono second hand; and PB2 to set the 1/20 second hand to 12:00 (zero) position. Each depression of the appropriate button advances one mark; or push and hold for 2 seconds to advance continuously. Return crown to normal position. |
Bracelet Instruction
|
Home
